Furthermore, the antenna cable does not come into direct contact with live cables. All connections are on the front, so it is never necessary to expose live parts. For the antenna connection, Wireless Netcontrol has opted for the industry standard SMA. The DIN rail model also receives its power supply via terminals (for example via wiring with a DIN rail power supply). These include a super fast data transfer with up to 100 Mbit / s downstream or up to 50 Mbit / s upstream.įor special industry standards, the modem is also available in the extra narrow DIN rail housing (the width is only 22 mm).įurthermore, the modems have a large supply voltage range (9-35 V DC). Originally developed as a pure GSM or GPRS modem, wireless netcontrol now also offers the future-proof LTE version, which enjoys great popularity on the market. Another benefit is the serial or RS232 interface, which still plays an important role in industrial applications or in the world of microcontrollers. Wireless netcontrol GmbH has the smallest LTE modem on its market in its portfolio, with just 62 x 59 x 20 mm / 49 g in the black standard housing. The loudspeaker shall be the Martin Audio MSX.In industry and electrical engineering, the device size is often of non-existential importance - The devices should be as small as possible to easily integrate them into existing applications can. Dimensions (W x H x D) excluding wheel-board with vent flap open shall be 500mm x 510mm x 675mm (19.7in x 20.1in x 26.6in). The driver shall be protected by a perforated steel grille and the enclosure shall incorporate an integral rigging system to assemble an array suspended from a dedicated flying frame.ĭimensions excluding wheel-board (W x H x D) shall be 500mm x 510mm x 575mm (19.7in x 20.1in x 22.6in). The loudspeaker enclosure shall be constructed from multi-laminate birch ply with a textured black polyurethane coating. The ground plane on-axis frequency response shall be 50Hz-150Hz +/- 3dB and the loudspeaker shall produce a maximum SPL of 136dB peak at 1 metre. Its power supply shall employ Power Factor Correction and operate from 100-240V, 50-60Hz AC.Īudio connectors shall be male and female XLR type and the AC power connector shall be a Powercon True1. The amplifier shall deliver a total of 3.2kW peak output and include networking capabilities to enable remote control and system monitoring. The loudspeaker shall incorporate a Class D amplifier module with nine channels of amplification and DSP to drive itself and four external two-way loudspeakers, with which it will form a complete, self-powered arrayable system. Its transducer shall be a 15” ultra-long excursion driver in a bass reflex enclosure. The loudspeaker shall be a self-powered subwoofer capable of being ground-stacked or flown.
0 Comments
Leave a Reply. |